- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
-
海绵泡沫材料检测仪器
-
泡沫起升仪
-
新-泡沫分析仪
-
海绵泡沫切割机
-
织物透气率测试仪
-
海绵压缩变形试验箱
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵落球回弹试验仪
-
海绵泡沫密度测试仪
-
海绵压陷硬度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩蠕变测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵空气透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵往复冲击疲劳试验机
-
海绵泡沫缓冲能量试验机
-
2000-海绵拉伸撕裂试...
-
落球回弹试验仪,介电击穿强度测定仪:1000-海绵拉伸撕裂试...
-
落球回弹试验仪,介电击穿强度测定仪:慢回弹泡沫复原时间测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-慢回弹泡沫复原时间测...
-
泡沫起升仪
- 受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
- 粉末测试设备
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高电阻值小电流大小做实验的时候仪(耐脉冲做实验的时候仪)-(计算出来机调控)
High voltage low current tester (arc resistance tester) - (computer control)
厂品牌称:耐电弧试验机
Product name: electric arc resistance tester
厂品机型:NDH-A
Product model: NDH - A
符合标:GB/T 1411-2002《气体隔绝相关材料耐高放低直流电压脉冲尖端放电的疲劳试验》(符合IEC 61621-1997)及ASTM D495等标的规定要求规划创造的,并适合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
核心符合依据及能力:
本实验室检测机是以技术应代替同步电机、电热器和家里用的电热器等行业内的电工维修用朔胶、环氧树脂村料胶和绝缘层性带层电阻漆等绝缘层性带层电阻村料的耐电孤能考评,主代替固态绝缘层性带层电阻村料如:朔胶、透明膜、环氧树脂村料、云母片、陶瓷制品、玻璃板、绝缘层性带层电阻油、绝缘层性带层电阻漆、纸箱等物质的耐电孤能测试图片;
本校正机由算起机有效控制正常运作,能够呈现眼下试验睡眠状态及试验时,试验截止后并保持眼下试验统计资料,并可打印出.标准化實驗报告范文。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 超声波焊接机为下一起组成部分,下部分为操作流程体系,上端为可靠性湿热。
2 本物料选用*新智慧有效控制技木,能够 选购软件程序(IEC或ASTM)可一键参与疲劳试验,并在电脑主机上显示信息耐压全过程和可是。
3 **效果比较好,抗抑制本事强,測試定位精较高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电孤通断时间段数据误差:超过 ±10ms
2 调压器存储量:2kVA
3 额定容量检验电流:12.5kV
4 实验室检测电压电流表面粗糙度:±3%
5 感应电流把握精确:±10% 电流值衡量精度等级:1.5%
6 探针对钢材拉伸试验压强:(0.5±0.05)N
7 电极片涂料:钨棒
8 电极材料相距:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 适用生态室温:(23±2)℃
10 适用室内环境空气湿度:(50±5)%
11 交流电源:220V±5% 50Hz
12 现场实验 手段: 国际标准/美标/10 mA 联续/20 mA 不断/30 mA维持/40 mA连着
13 实验过程正确:
| 程序代码段 | 弧光工作电流 mA | 焊弧通断时s | 各环节段继续精力s | 试验检测总时s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 累计通 | 60 | 240 | |
| 5 | 20 | 重复通 | 60 | 300 | |
| 6 | 30 | 连续式通 | 60 | 360 | |
| 7 | 40 | 累计通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 编号 | 公司名称 | 用量 | 微信备注名 |
| 01 | 耐脉冲考试仪 | 一个 | |
| 02 | 参比电极平台 | 有一套 | |
| 03 | 工业支架 | 有一套 | |
| 04 | 开关电源电力电缆 | 这套 | |
| 05 | 跨接放** | 一只 | |
| 06 | 工作电流毫安表 | 这台 | |
| 07 | 线上测控软件下载 | 一项 | |
| 08 | 试件材料架 | 一瓶 | |
| 09 | 电极材料范围细则块 | 2块 | |
| 10 | 的角度标准块 | 2块 | |
| 11 | 瓷砖片 | 2片 | |
| 12 | 喷墨打印图片机 | 1台 | 企业 |
| 13 | 确定机 | 1台 | 牌子 |
| 14 | 选择描述书 | 1份 | |
| 15 | 合适证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 新产品材质:
NDH-A 耐电弧焊接疲劳试验仪-微机操纵
NDH-B 耐电弧放电现场实验仪-触模屏调节
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!